Retractable screens
Care and maintenance guide
Please share these instructions with staff and visitors who will use your screens.
1. Using the turn handle
The turn handle on the draw bar disengages the brake mechanism from both the top and bottom tracks. Always turn the handle before sliding the draw bar along the track. Once the screen is in the desired position, release the handle to engage the brakes.
Do not drag the draw bar while the brakes are engaged. Only pull the draw bar from its centre height so that equal pressure is applied to the upper and lower tracks.
2. Understanding mesh movement
Retractable screen mesh is not held taut in the same way as a fixed panel screen. A zip runs in a small channel in the top and bottom aluminium tracks and needs a little movement to travel smoothly. It is normal for the mesh to bow inwards or outwards under wind load.
3. Operating in windy conditions
Our screens can tolerate high wind loads in either the open or closed position. However, opening or closing a screen during strong or gusty winds can be difficult, and forcing it may cause damage.
During high winds, leave the screen in its existing open or closed position. Do not force it to move. Most flying insects are generally less active during windy periods.
Under no circumstances should a screen ever be forced.
4. Cleaning the mesh
The strong, easy-clean poly-mesh can be cleaned dry with a brush, or with a damp cloth or sponge and a mild detergent.
Jet-washing is also possible, provided the spray nozzle is kept a reasonable distance from the mesh. High-pressure water directed at close range can cut the material.
5. Cleaning and lubricating the tracks
Dirt and small debris can collect in the channel where the zip runs. Clear it by gently running a small piece of card or folded paper along the channel to release the dirt. Further cleaning can be carried out with a water hose or jet-wash.
After cleaning, the channel can be lubricated with a silicone spray, available from stores such as HomePro. Use silicone spray rather than an oil-based spray such as standard WD-40. Silicone is less reactive with certain plastics and polymers.
6. Preventing accidental mesh damage
The mesh can become almost invisible when viewed from a few metres away. Someone walking or running into it with sufficient force may rip the zip teeth attached to the mesh. Broken zip teeth usually require a replacement mesh kit. This accidental damage is not covered under warranty.
We strongly recommend applying small visibility stickers to the mesh to warn guests and help prevent collisions while you get used to your screens.
Need help with your screens? Contact our team ↗